Atlas ECS-3 Manual do Utilizador Página 7

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 16
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 6
– 7 – AtlasSound.com
Specifications are subject to change without notice.
Owner’s Manual
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
ECS-3
Power Sequencer & Conditioner
Front Panel
1. Unswitched AC OutletThe two 120VAC outlets are always live when the ECS-3 power cord is plugged into an AC mains
power source and voltage is present. If voltage is present at the outlets, it will be displayed on the AC Mains Meter.
Note: The AC mains power switch or sequencer section does not affect the Unswitched AC Outlets. The Unswitched Outlets are
protected by the surge protection circuitry, but will not be shut off by the EVS circuit.
2. AC Mains Breaker The 15A rated breaker will open if the combined continuous current draw of all AC outlets exceeds 15A.
Note: In audio applications, peak current demands commonly exceed the continuous current ratings on AC outlets. Note: The
breakers are designed to exceed their rating for a short period of time. If the breaker is tripped, to reset you must first remove the
load from the ECS-3 and push the center button on the breaker.
3. System Activation SwitchTo turn the ECS-3 On or Off, press the momentary switch once.
4. Pull Out LightThe LED light is designed to be pulled out when needed.
5. Pull Out Light Dimmer SwitchThe Pull Out Light can be turned “On” or “Off” by this switch. There are also two brightness
settings.
1 2 3 4 5
Vista de página 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comentários a estes Manuais

Sem comentários